Epoxy Flooring in Orfordville, WI

Epoxy flooring in Orfordville covers two very different jobs. Inside the village, most of what we coat is a home garage or a basement. Outside it, across western Rock County farm country, the floor is more likely to be a machine shed, a heated shop or a pole building where tractors and trucks get worked on. We drive out from Janesville for both, and we plan each one around how the floor gets used.

How the village grew

Orfordville sits where Highway 11, Highway 213 and the Wisconsin and Southern Railroad meet. Census counts show it at 543 people in 1950 and 888 in 1970. By 1980 it had 1,143 residents, and it reached 1,473 in the 2020 census. That jump in the 1970s means a good share of village homes date from that decade or later. Those houses usually have attached garages with slabs that are now about fifty years old. Many have hairline cracks, a worn surface near the door and oil spots that soaked in long ago.

What fits a village garage

• Garage floor epoxy for a full seal over a slab that has seen decades of road salt
• Epoxy flake floors when you want a textured finish that hides dirt and tracked-in gravel
• Concrete crack and floor repair first, since a 1970s slab almost always needs some patching

A small village does not mean small winters. The salt and slush on Highway 11 come home on your tires the same way they do in Janesville. Once the slab is ground and sealed, that brine stays on top where a squeegee can move it.

Heated or unheated?

A lot of country shops near Orfordville have a wood stove or a hanging heater that runs only when someone is working. That matters for curing. Epoxy wants the concrete to stay warm for the first days after it goes down. If your shop is heated only part time, we ask you to keep the heat on through the cure, or we plan the job for a warm spell. In an attached village garage, we may ask you to keep the overhead door shut and the house door closed while the coating sets. Small steps like these make a real difference in how well the floor holds up after its first winter.

Shops, sheds and pole buildings

Farm and acreage floors take a different kind of wear. Equipment drips hydraulic oil and diesel. Tire chains and loader buckets scrape the surface. Some of these slabs were poured without much finishing, so they are rough and uneven. For these floors we lean toward shop and commercial floor epoxy, built thicker, often with a broadcast for grip. If the building is unheated, we talk about polyaspartic floor coating, which cures fast and can go on across a wider range of temperatures than many epoxies.

Big open slabs also hide problems. We walk the whole floor, look for heaved joints and low spots that hold water, and check for moisture near the edges. If part of a slab is moving, we tell you before we price a coating over it.

Planning the visit

Tell us whether the floor is in the village or out on a farm, roughly how many square feet it is, and what parks or gets worked on there. Photos of oil stains, cracks and any old paint help. We give you a written quote that lists the prep, each coat and the total before any work starts. Call (608) 351-0386 or

Get a Free Estimate

.